汽車保險絲更換步驟，汽車保險絲怎麼拔出來
Car Fuse Replacement Steps How to pull out the car fuse
2 .通過熔斷的熔絲判別損壞的保險絲
3 .用保險絲取出器拆下燒斷的保險絲。保險絲取出器位於發動機艙保險絲盒蓋內
4.確定導致保險絲燒斷的原因並排除故障
5安裝額定電流符合規定的新保險絲
必須使用保險絲取出器拔出來。禁止用導電的工具拆卸燒斷的保險絲，必須使用保險絲取出器。使用金屬等導電體，會導致短路，損壞電氣系統或著火，可能會造成嚴重人身傷害。
一般車內保險絲盒位置:
車內保險絲盒位於儀錶板左下方，拔出儲物盒即可看到
一般車內用電器的保險絲位於方向盤附近或者在手套箱裡面，相比與機艙的保險絲來說較為複雜，建議拆裝前詳細閱讀車輛說明書。
一般發動機艙保險絲盒位置發動機艙保險絲盒位於蓄電池旁邊。
The procedure for replacing a car fuse：
1 . Open the fuse box cover
2 . Identify the damaged fuse by the blown fuse
3 . Remove the burnt fuse with the fuse extractor. The fuse extractor is located in the fuse box cover of the engine compartment
4. Determine the cause of the burnt fuse and rectify the problem
5 Install a new fuse with rated current as required
How to pull out the car fuse
The fuse has to be removed with a fuse extractor. It is forbidden to remove a burnt fuse with an electrically conductive tool and a fuse extractor must be used. The use of metal conductors may cause a short circuit, damage to the electrical system or a fire, which may result in serious personal injury.
Location of the fuse box in the vehicle.
The fuse box is usually located at the bottom left of the dashboard and can be seen by pulling out the storage box.
The fuse box for electrical appliances is usually located near the steering wheel or in the glove box, which is more complicated than the fuse box for the cabin.
0 Comments